ATmega328P CH340 USB Microcontroller Board Arduino Compatible – Envistia Mall
Por un escritor de hombre misterioso
Descripción
This Arduino-Compatible ATmega328P development board has all of the features of the original Arduino Uno with the added benefit of an ISP header and CH340G USB interface. The UNO can be programmed over a USB B cable using the Arduino IDE.
This Arduino-Compatible ATmega328P development board has all of the features of the original Arduino Uno with the added benefit of an ISP header and CH340G USB interface. This development board can be programmed over a USB B cable using the Arduino IDE: Just plug in the board, select Arduino UNO from the board menu and you are ready to upload sketches. You can power the Board over USB or through the barrel jack.
Arduino Uno R3 Compatible ATmega328P CH340 USB Microcontroller Board
This Arduino-Compatible ATmega328P development board has all of the features of the original Arduino Uno with the added benefit of an ISP header and CH340G USB interface. This development board can be programmed over a USB B cable using the Arduino IDE: Just plug in the board, select Arduino UNO from the board menu and you are ready to upload sketches. You can power the ATmega328P Board over USB or through the barrel jack.
Envistia Arduino Uno R3 Compatible with USB Cable ATmega328P CH340 USB
Arduino Nano Micro-Controller with ATmega328P 16MHz 5.0V CH340G USB – Envistia Mall
Treedix 2pcs ATmega328P CH340 Development Board Compatible with Arduin – Treedix Official
The Arduino-compatible Nano V3.0 micro-controller is a small, complete, micro-controller board based on the ATmega328P MCU. It has more or less the same functionality of the Arduino Duemilanove, but in a smaller package. It lacks only a DC power jack, and uses a more compact Mini USB (Mini-B) USB cable instead of a standard one. The Nano IO Expansion Shield is designed to connect and work with ARDUINO Compatible NANO Micro-Controllers.
Nano 3.0 Micro-Controller ATmega328P with I / O Expansion Shield Module
HiLetgo 3pcs Nano 3.0 ATmega328P Type-C USB CH340 Controller Board Compatible to
Development Board ATmega 328P CH340 compatible with Arduino UNO IDE – BoardsAndSensors
This Arduino-Compatible ATmega328P development board has all of the features of the original Arduino Uno with the added benefit of an ISP header and CH340G USB interface. This development board can be programmed over a USB B cable using the Arduino IDE: Just plug in the board, select Arduino UNO from the board menu and you are ready to upload sketches. You can power the Board over USB or through the barrel jack.
Arduino Uno R3 Compatible ATmega328P CH340 USB Microcontroller Board
Arduino Uno Cable
This Arduino-Compatible ATmega328P development board has all of the features of the original Arduino Uno with the added benefit of an ISP header and CH340G USB interface. This development board can be programmed over a USB B cable using the Arduino IDE: Just plug in the board, select Arduino UNO from the board menu and you are ready to upload sketches. You can power the Board over USB or through the barrel jack.
Arduino Uno R3 Compatible ATmega328P CH340 USB Microcontroller Board
Attention:before running the procedure, pls install the corresponding computer system driver. Drivers: directly from the chip manufacturer: WCH 340
Mini Nano V3.0 ATmega328P Module Micro Controller Board with USB Cable for Arduino
Only 9.56 usd for ATmega328P Microcontroller Starter Kit 400 Point Breadboard, 65 Jumpers, USB & Battery Cables Online at the Shop
The Arduino-compatible Nano V3.0 micro-controller is a small, complete, micro-controller board based on the ATmega328P MCU. It has more or less the same functionality of the Arduino Duemilanove, but in a smaller package. It lacks only a DC power jack, and uses a more compact Mini USB (Mini-B) USB cable instead of a standard one. The Nano IO Expansion Shield is designed to connect and work with ARDUINO Compatible NANO Micro-Controllers.
Nano 3.0 Micro-Controller ATmega328P with I / O Expansion Shield Module
The ATTiny88 (16.0Mhz) based microcontroller development board is similar to the Arduino microcontroller line, only smaller and a bit less powerful. With the ability to use the familiar Aduino IDE, the ATTiny88 is a great microcontroller board to jump into electronics, or perfect for when other boards are too big or too much. The ATTiny88 (16.0Mhz) is fully assembled except for the headers, which are included and are easy to solder yourself.
Envistia Attiny88 Micro Development Board ATmega328 16MHz / Digispark Attiny85 Upgrade for Arduino
HiLetgo 3pcs Nano 3.0 ATmega328P Type-C USB CH340 Controller Board Compatible to
de
por adulto (el precio varía según el tamaño del grupo)